REQUESTED SIZE / SPECIFICATION REVIEW
0.75 × 2.75 in
Domed resin stickers
One piece’s outer bounding box, before the final outline and production details. Use the worksheet to check scale and prepare your quote.
From $856 for 1,000 pieces.
How big are 0.75 x 2.75 in domed resin stickers?
Custom Stickers Factory (customstickersfactory.com) prints 0.75 x 2.75 in domed resin stickers, with each piece measuring 19.05 x 69.85 mm (1.905 x 6.985 cm) at the outer edge. It fits within a standard bank card, which is 3.375 x 2.125 in. A run of 1,000 pieces costs $856 ($0.856 each), with standard US shipping included. The minimum is 1,000 pieces per artwork and specification, and you approve a proof before printing.
Prices for this size.
| Quantity | Price | Per piece |
|---|---|---|
| 1,000 pieces | $856 | $0.856 |
| 1,500 pieces | $1,204 | $0.803 |
Printed and cut to 0.75 × 2.75 in from one artwork. Standard shipping within the US is included; other destinations are quoted.
Key takeaways
Custom Stickers Factory has a minimum order of 1,000 pieces for Domed resin stickers, per artwork and manufacturing specification.
- Material & format
- Printed film with supplier-confirmed resin. Fixed-layout sheets of individual stickers.
- Size & quantity
- 0.75 × 2.75 in (19.05 × 69.85 mm) is the requested outer bounding size. Count individual domed stickers, not the sheets they are supplied on.
- Intended uses
- Product badges; Brand marks; Equipment decoration. Confirm suitability for the actual surface and conditions.
- Before ordering
- Do not assume custom contours, individual die-cut delivery or multi-design sheets are supported. Published prices apply to the listed size and quantity. A different specification needs a quote.
The dimensions.
- Requested width × height
- 0.75 × 2.75 in
- Exact metric conversion
- 19.05 × 69.85 mm
- Bounding area
- 2.0625 in² / 1330.6425 mm²
- Width : height
- 3:11
- Measurement unit
- One individual piece
- Minimum quote quantity
- 1,000 pieces per specification
Area is width × height, not ink coverage or the area inside a custom cut shape. Conversion source: NIST, 1 inch = 25.4 mm exactly.
YOUR REQUESTED SPECIFICATION
Quote 0.75 × 2.75 in.
Domed resin stickers. Minimum 1,000 pieces per artwork or sheet layout and manufacturing specification. The dimensions are prefilled and editable. Prices are listed above; production feasibility is confirmed after review.
TAKE IT OFF SCREEN
Print. Measure. Check.
The SVG has physical inch dimensions and a 1-inch calibration bar. Print at 100%, disable fit-to-page and measure the bar before using the outline.
Worksheet canvas: 8.5 × 11 in. The worksheet uses a US Letter canvas. Check your printer margins and scaling settings.
Size reference only. No production bleed, safe area, die line, cut spacing or availability is approved.
Printed film with supplier-confirmed resin
Prepare this brief.
A raised resin layer gives a printed label a three-dimensional surface. Available shapes, dimensions and sheet layouts depend on the production process.
- Measure one individual domed sticker, not its production sheet. Confirm corner geometry and minimum detail with the supplier.
- Request the supported fixed layout and resin construction. This bounding box is not an approved contour or dome tool.
At 300 pixels per inch, a raster example for these bounds is 225 × 825 pixels. Confirm the required resolution and smallest detail before production.
Checks for domed resin stickers
- Quote quantity counts individual domed stickers, not sheets.
- Do not assume custom contours, individual die-cut delivery or multi-design sheets are supported.
Compare nearby sizes.
Closest worksheets by change in both dimensions. Area differences compare bounding boxes only.
| Requested size | Metric dimensions | Area change |
|---|---|---|
| 0.625 × 2.75 in | 15.875 × 69.85 mm | -0.34375 in² |
| 0.875 × 2.75 in | 22.225 × 69.85 mm | +0.34375 in² |
| 0.75 × 2.5 in | 19.05 × 63.5 mm | -0.1875 in² |
| 0.75 × 3 in | 19.05 × 76.2 mm | +0.1875 in² |
| 1 × 2.75 in | 25.4 × 69.85 mm | +0.6875 in² |
Sources and worksheet boundaries
These worksheets compare requested dimensions; they do not confirm available manufacturing sizes. Check the print scale and use the brief to request specification review.
NIST defines the exact inch-to-millimetre conversion. The SVG shows the requested bounding size and includes a 1-inch bar to check your printed scale.