REQUESTED SIZE / SPECIFICATION REVIEW
2 × 2.25 in
Domed resin stickers
One piece’s outer bounding box, before the final outline and production details. Use the worksheet to check scale and prepare your quote.
Quote this requested sizeThe dimensions.
- Requested width × height
- 2 × 2.25 in
- Exact metric conversion
- 50.8 × 57.15 mm
- Bounding area
- 4.5 in² / 2903.22 mm²
- Width : height
- 8:9
- Measurement unit
- One individual piece
- Minimum quote quantity
- 1,000 pieces per specification
Area is width × height, not ink coverage or the area inside a custom cut shape. Conversion source: NIST, 1 inch = 25.4 mm exactly.
TAKE IT OFF SCREEN
Print. Measure. Check.
The SVG has physical inch dimensions and a 1-inch calibration bar. Print at 100%, disable fit-to-page and measure the bar before using the outline.
Worksheet canvas: 8.5 × 11 in. The worksheet uses a US Letter canvas. Check your printer margins and scaling settings.
Size reference only. No production bleed, safe area, die line, cut spacing or availability is approved.
Printed film with supplier-confirmed resin
Prepare this brief.
A raised resin layer gives a printed label a three-dimensional surface. Available shapes, dimensions and sheet layouts depend on the production process.
- Measure one individual domed sticker, not its production sheet. Confirm corner geometry and minimum detail with the supplier.
- Request the supported fixed layout and resin construction. This bounding box is not an approved contour or dome tool.
As a raster sizing example, 600 × 675 pixels gives at least 300 pixels per inch across these bounds. This is arithmetic guidance, not an approved artwork requirement; confirm the actual resolution and smallest detail before production.
Checks for domed resin stickers
- Quote quantity counts individual domed stickers, not sheets.
- Do not assume custom contours, individual die-cut delivery or multi-design sheets are supported.
Compare nearby sizes.
Closest worksheets by change in both dimensions. Area differences compare bounding boxes only.
| Requested size | Metric dimensions | Area change |
|---|---|---|
| 1.75 × 2.25 in | 44.45 × 57.15 mm | -0.5625 in² |
| 2 × 2 in | 50.8 × 50.8 mm | -0.5 in² |
| 2 × 2.5 in | 50.8 × 63.5 mm | +0.5 in² |
| 2.25 × 2.25 in | 57.15 × 57.15 mm | +0.5625 in² |
| 1.75 × 2 in | 44.45 × 50.8 mm | -1 in² |
YOUR REQUESTED SPECIFICATION
Quote 2 × 2.25 in.
Domed resin stickers. Minimum 1,000 pieces per artwork or sheet layout and manufacturing specification. The dimensions are prefilled and editable. Pricing and feasibility are confirmed after review.
Sources and worksheet boundaries
These worksheets compare requested dimensions; they do not confirm available manufacturing sizes. Check the print scale and use the brief to request specification review.
NIST defines the exact inch-to-millimetre conversion. The SVG shows the requested bounding size and includes a 1-inch bar to check your printed scale.