REQUESTED SIZE / SPECIFICATION REVIEW
0.5 × 1.75 in
Metallic BOPP roll labels
One piece’s outer bounding box, before the final outline and production details. Use the worksheet to check scale and prepare your quote.
Quote this requested sizeThe dimensions.
- Requested width × height
- 0.5 × 1.75 in
- Exact metric conversion
- 12.7 × 44.45 mm
- Bounding area
- 0.875 in² / 564.515 mm²
- Width : height
- 2:7
- Measurement unit
- One individual piece
- Minimum quote quantity
- 1,000 pieces per specification
Area is width × height, not ink coverage or the area inside a custom cut shape. Conversion source: NIST, 1 inch = 25.4 mm exactly.
TAKE IT OFF SCREEN
Print. Measure. Check.
The SVG has physical inch dimensions and a 1-inch calibration bar. Print at 100%, disable fit-to-page and measure the bar before using the outline.
Worksheet canvas: 8.5 × 11 in. The worksheet uses a US Letter canvas. Check your printer margins and scaling settings.
Size reference only. No production bleed, safe area, die line, cut spacing or availability is approved.
Metallic BOPP
Prepare this brief.
A metallic film base for roll-applied packaging labels. The visible metal effect depends on ink coverage and the chosen finish.
- Measure one label. Quantity counts individual labels, not rolls.
- Record which edge leads, unwind direction, core, label gap and printer or applicator model. These are not set by rotating this worksheet.
As a raster sizing example, 150 × 525 pixels gives at least 300 pixels per inch across these bounds. This is arithmetic guidance, not an approved artwork requirement; confirm the actual resolution and smallest detail before production.
Checks for metallic bopp roll labels
- Confirm metallic color, white ink and finish with a sample.
- Material appearance does not imply a metal barrier or industrial certification.
Compare nearby sizes.
Closest worksheets by change in both dimensions. Area differences compare bounding boxes only.
| Requested size | Metric dimensions | Area change |
|---|---|---|
| 0.5 × 1.5 in | 12.7 × 38.1 mm | -0.125 in² |
| 0.5 × 2 in | 12.7 × 50.8 mm | +0.125 in² |
| 0.75 × 1.75 in | 19.05 × 44.45 mm | +0.4375 in² |
| 0.75 × 1.5 in | 19.05 × 38.1 mm | +0.25 in² |
| 0.75 × 2 in | 19.05 × 50.8 mm | +0.625 in² |
YOUR REQUESTED SPECIFICATION
Quote 0.5 × 1.75 in.
Metallic BOPP roll labels. Minimum 1,000 pieces per artwork or sheet layout and manufacturing specification. The dimensions are prefilled and editable. Pricing and feasibility are confirmed after review.
Sources and worksheet boundaries
These worksheets compare requested dimensions; they do not confirm available manufacturing sizes. Check the print scale and use the brief to request specification review.
NIST defines the exact inch-to-millimetre conversion. The SVG shows the requested bounding size and includes a 1-inch bar to check your printed scale.