REQUESTED SIZE / SPECIFICATION REVIEW
0.625 × 0.625 in
Tamper-evident seals
One piece’s outer bounding box, before the final outline and production details. Use the worksheet to check scale and prepare your quote.
Quote this requested sizeThe dimensions.
- Requested width × height
- 0.625 × 0.625 in
- Exact metric conversion
- 15.875 × 15.875 mm
- Bounding area
- 0.390625 in² / 252.015625 mm²
- Width : height
- 1:1
- Measurement unit
- One individual piece
- Minimum quote quantity
- 1,000 pieces per specification
Area is width × height, not ink coverage or the area inside a custom cut shape. Conversion source: NIST, 1 inch = 25.4 mm exactly.
TAKE IT OFF SCREEN
Print. Measure. Check.
The SVG has physical inch dimensions and a 1-inch calibration bar. Print at 100%, disable fit-to-page and measure the bar before using the outline.
Worksheet canvas: 8.5 × 11 in. The worksheet uses a US Letter canvas. Check your printer margins and scaling settings.
Size reference only. No production bleed, safe area, die line, cut spacing or availability is approved.
Slit paper or verified security film
Prepare this brief.
Labels designed to show evidence of removal or opening. Slit paper, destructible film and VOID constructions are separate security mechanisms.
- Measure the closure and both surfaces the seal would bridge.
- Describe how the item opens and request a test on the actual surface. A size worksheet cannot establish security behavior.
As a raster sizing example, 188 × 188 pixels gives at least 300 pixels per inch across these bounds. This is arithmetic guidance, not an approved artwork requirement; confirm the actual resolution and smallest detail before production.
Checks for tamper-evident seals
- A tamper-evident label does not prevent tampering.
- Security behavior must be tested on the actual surface and closure.
Compare nearby sizes.
Closest worksheets by change in both dimensions. Area differences compare bounding boxes only.
| Requested size | Metric dimensions | Area change |
|---|---|---|
| 0.5 × 0.625 in | 12.7 × 15.875 mm | -0.078125 in² |
| 0.625 × 0.75 in | 15.875 × 19.05 mm | +0.078125 in² |
| 0.5 × 0.5 in | 12.7 × 12.7 mm | -0.140625 in² |
| 0.5 × 0.75 in | 12.7 × 19.05 mm | -0.015625 in² |
| 0.75 × 0.75 in | 19.05 × 19.05 mm | +0.171875 in² |
YOUR REQUESTED SPECIFICATION
Quote 0.625 × 0.625 in.
Tamper-evident seals. Minimum 1,000 pieces per artwork or sheet layout and manufacturing specification. The dimensions are prefilled and editable. Pricing and feasibility are confirmed after review.
Sources and worksheet boundaries
These worksheets compare requested dimensions; they do not confirm available manufacturing sizes. Check the print scale and use the brief to request specification review.
NIST defines the exact inch-to-millimetre conversion. The SVG shows the requested bounding size and includes a 1-inch bar to check your printed scale.