REQUESTED SIZE / SPECIFICATION REVIEW
2 × 2.75 in
Tamper-evident seals
One piece’s outer bounding box, before the final outline and production details. Use the worksheet to check scale and prepare your quote.
From $305 for 1,000 pieces.
How big are 2 x 2.75 in tamper-evident seals?
Custom Stickers Factory (customstickersfactory.com) prints 2 x 2.75 in tamper-evident seals, with each piece measuring 50.8 x 69.85 mm (5.08 x 6.985 cm) at the outer edge. It fits within a standard bank card, which is 3.375 x 2.125 in. A run of 1,000 pieces costs $305 ($0.305 each) and 2,500 pieces cost $540, with standard US shipping included. The minimum is 1,000 pieces per artwork and specification, and you approve a proof before printing.
Prices for this size.
| Quantity | Price | Per piece |
|---|---|---|
| 1,000 pieces | $305 | $0.305 |
| 1,500 pieces | $387 | $0.258 |
| 2,500 pieces | $540 | $0.216 |
| 5,000 pieces | $650 | $0.130 |
| 10,000 pieces | $1,090 | $0.109 |
Printed and cut to 2 × 2.75 in from one artwork. Standard shipping within the US is included; other destinations are quoted.
Key takeaways
Custom Stickers Factory has a minimum order of 1,000 pieces for Tamper-evident seals, per artwork and manufacturing specification.
- Material & format
- Slit paper or verified security film. Supplier-confirmed label format.
- Size & quantity
- 2 × 2.75 in (50.8 × 69.85 mm) is the requested outer bounding size. Count individual pieces of one artwork and specification.
- Intended uses
- Delivery packaging; Product seals; Equipment seals. Confirm suitability for the actual surface and conditions.
- Before ordering
- A tamper-evident label does not prevent tampering. Published prices apply to the listed size and quantity. A different specification needs a quote.
The dimensions.
- Requested width × height
- 2 × 2.75 in
- Exact metric conversion
- 50.8 × 69.85 mm
- Bounding area
- 5.5 in² / 3548.38 mm²
- Width : height
- 8:11
- Measurement unit
- One individual piece
- Minimum quote quantity
- 1,000 pieces per specification
Area is width × height, not ink coverage or the area inside a custom cut shape. Conversion source: NIST, 1 inch = 25.4 mm exactly.
YOUR REQUESTED SPECIFICATION
Quote 2 × 2.75 in.
Tamper-evident seals. Minimum 1,000 pieces per artwork or sheet layout and manufacturing specification. The dimensions are prefilled and editable. Prices are listed above; production feasibility is confirmed after review.
TAKE IT OFF SCREEN
Print. Measure. Check.
The SVG has physical inch dimensions and a 1-inch calibration bar. Print at 100%, disable fit-to-page and measure the bar before using the outline.
Worksheet canvas: 8.5 × 11 in. The worksheet uses a US Letter canvas. Check your printer margins and scaling settings.
Size reference only. No production bleed, safe area, die line, cut spacing or availability is approved.
Slit paper or verified security film
Prepare this brief.
Labels designed to show evidence of removal or opening. Slit paper, destructible film and VOID constructions are separate security mechanisms.
- Measure the closure and both surfaces the seal would bridge.
- Describe how the item opens and request a test on the actual surface. A size worksheet cannot establish security behavior.
At 300 pixels per inch, a raster example for these bounds is 600 × 825 pixels. Confirm the required resolution and smallest detail before production.
Checks for tamper-evident seals
- A tamper-evident label does not prevent tampering.
- Security behavior must be tested on the actual surface and closure.
Compare nearby sizes.
Closest worksheets by change in both dimensions. Area differences compare bounding boxes only.
| Requested size | Metric dimensions | Area change |
|---|---|---|
| 1.75 × 2.75 in | 44.45 × 69.85 mm | -0.6875 in² |
| 2 × 2.5 in | 50.8 × 63.5 mm | -0.5 in² |
| 2 × 3 in | 50.8 × 76.2 mm | +0.5 in² |
| 2.25 × 2.75 in | 57.15 × 69.85 mm | +0.6875 in² |
| 1.75 × 2.5 in | 44.45 × 63.5 mm | -1.125 in² |
Sources and worksheet boundaries
These worksheets compare requested dimensions; they do not confirm available manufacturing sizes. Check the print scale and use the brief to request specification review.
NIST defines the exact inch-to-millimetre conversion. The SVG shows the requested bounding size and includes a 1-inch bar to check your printed scale.