REQUESTED SIZE / SPECIFICATION REVIEW
1 × 4 in
Thermal-compatible labels
One piece’s outer bounding box, before the final outline and production details. Use the worksheet to check scale and prepare your quote.
Quote this requested sizeThe dimensions.
- Requested width × height
- 1 × 4 in
- Exact metric conversion
- 25.4 × 101.6 mm
- Bounding area
- 4 in² / 2580.64 mm²
- Width : height
- 1:4
- Measurement unit
- One individual piece
- Minimum quote quantity
- 1,000 pieces per specification
Area is width × height, not ink coverage or the area inside a custom cut shape. Conversion source: NIST, 1 inch = 25.4 mm exactly.
TAKE IT OFF SCREEN
Print. Measure. Check.
The SVG has physical inch dimensions and a 1-inch calibration bar. Print at 100%, disable fit-to-page and measure the bar before using the outline.
Worksheet canvas: 8.5 × 11 in. The worksheet uses a US Letter canvas. Check your printer margins and scaling settings.
Size reference only. No production bleed, safe area, die line, cut spacing or availability is approved.
Thermal paper or top-coated film
Prepare this brief.
Label constructions for direct thermal or thermal transfer equipment. Select the print method before choosing stock, roll dimensions and sensing requirements.
- Measure one label. Quantity counts individual labels, not rolls.
- Record which edge leads, unwind direction, core, label gap and printer or applicator model. These are not set by rotating this worksheet.
As a raster sizing example, 300 × 1200 pixels gives at least 300 pixels per inch across these bounds. This is arithmetic guidance, not an approved artwork requirement; confirm the actual resolution and smallest detail before production.
Checks for thermal-compatible labels
- Direct thermal and thermal transfer are different production routes.
- Confirm printer model, ribbon, core, winding, sensing and service conditions.
Compare nearby sizes.
Closest worksheets by change in both dimensions. Area differences compare bounding boxes only.
| Requested size | Metric dimensions | Area change |
|---|---|---|
| 0.75 × 4 in | 19.05 × 101.6 mm | -1 in² |
| 1.25 × 4 in | 31.75 × 101.6 mm | +1 in² |
| 1 × 3.5 in | 25.4 × 88.9 mm | -0.5 in² |
| 1.5 × 4 in | 38.1 × 101.6 mm | +2 in² |
| 0.75 × 3.5 in | 19.05 × 88.9 mm | -1.375 in² |
YOUR REQUESTED SPECIFICATION
Quote 1 × 4 in.
Thermal-compatible labels. Minimum 1,000 pieces per artwork or sheet layout and manufacturing specification. The dimensions are prefilled and editable. Pricing and feasibility are confirmed after review.
Sources and worksheet boundaries
These worksheets compare requested dimensions; they do not confirm available manufacturing sizes. Check the print scale and use the brief to request specification review.
NIST defines the exact inch-to-millimetre conversion. The SVG shows the requested bounding size and includes a 1-inch bar to check your printed scale.